How to install an external heat and cool pump

If you have purchased an add-on heat&cool pump with your spa, refer to this information for installation & operation

The heat&cool pump will be supplied with a data and power cable already fitted, it simply needs to be connected to the Spanet SV spa control by referring to the SV Series Heat Pump Manual supplied with your spa.

A separate power source for the heat pump is not required.

This video takes you through the procedure of fitting a heat&cool pump to your spa pool. You may connect this yourself or your local store can carry out this work at handover.

Heat&cool pump installation : stable concrete base / adequate air flow for fan output / close to swim spa for most efficient heating

Once connected, the SV controller will automatically detect the heat pump and enable its operation. Operation and use of the heat&cool pump is covered in a dedicated section of the manual provided